SPA STAIN OUT
Eliminates Mineral Stains and Coloration
SPA STAIN OUT is a sequestrant that is mainly used to remove stains caused by metals such as manganese, iron and copper from all types of spa coatings. SPA STAIN OUT also helps to correct water coloured by these metals.
BENEFITS
Removes metal stains from all types of spa coatings
Corrects coloured water due to manganese, iron or copper from any water sources
Phosphate-free
FORMAT
1.2 kg
Product code: 2907335
Solution
Powder
Before bathing
Application method
Sprinkle SPA STAIN OUT directly over the surface of spa water.
Instructions
- Adjust pH to between 6.8 and 7.2 and let chlorine level drop below 2 ppm.
- Add SPA STAIN OUT according to the application method and recommended dosage.
- Circulate water continuously for 24 hours.
- After 24 hours, adjust pH to between 7.2 and 7.8 and alkalinity to between 80 and 120 ppm.
- After 72 hours, add chlorine.
- Wait 30 minutes before bathing, depending on the situation.
Dosage
- For coloured water: Add 15 g of SPA STAIN OUT per 1,000 L of spa water.
- For stain removal: Slowly add water to 15 g of SPA STAIN OUT to form a paste. Apply paste to spa walls or wherever stains are present. Where stains are most prevalent, use a brush to apply the paste.
- For stubborn stains: Apply product a second time.
SPA SIZE
COLOURED WATER
STAINS ON SURFACES
1,000 L
15 g
Form a paste with 15 g of product
1,500 L
25 g
Form a paste with 15 g of product
Warning
DO NOT apply the product when people are in the spa.
Related Products
Featured Articles
Tips & Tricks Bulletin
Subscribe to receive Pool and Spa care tips by email and text message.
©Sani Marc inc. 2025 | All rights reserved
